Ring Sizes

HOW TO MEASURE YOUR RING SIZE

Follow these directions for an approximate guide to establish your ring size. 

  1. Use a piece of string or strip of paper no wider than 1cm.
  2. Wrap it around the base of the appropriate finger.
  3. Use a pen to mark the point on the string/paper where it overlaps, forming a complete circle.
  4. With a ruler, measure the length from the starting end of the string/paper to the pen mark.
  5. Use the chart below to determine your ring size.

 

TIPS

  • After sliding the ring sizer on, make sure it slides off fairly easily over the knuckle.
  • For the most accurate reading using this estimated method, measure the finger at the end of the day when the finger is likely to be at it's largest.
  • Don't measure cold fingers. This is when fingers are their smallest
  • For the most accurate reading, measure the finger at the end of the day when the finger is the largest

 

International Ring Size Conversion Chart

Inside Diameter  Inside Circumference Sizes
MM Inches MM Inches British & Australian  US & Canada French & Russian German Japanese Swiss
9.91 0.390 31.13 1.22 - 0000 - - - -
10.72 0.442 33.68 1.39 - 00 - - - -
11.53 0.454 36.22 1.43 - 0 - - - -
11.95 0.474 37.54 1.49 A 1/2 - - - -
12.18 0.482 38.26 1.51 A 1/2 3/4 - - - -
12.37 0.487 38.86 1.53 B 1 - - 1 -
12.60 0.496 39.58 1.56 B 1/2 1 1/4 - - - -
12.78 0.503 40.15 1.58 C 1 1/2 - - - -
13.00 0.512 40.84 1.61 C 1/2 1 3/4 - - - -
13.21 0.520 41.50 1.63 D 2 41 1/2 13 1/2 2 1 1/2
13.41 0.528 42.13 1.66 D 1/2 2 1/4 - - - -
13.61 0.536 42.76 1.68 E 2 1/2 42 3/4 13 3/4 3 2 3/4
13.83 0.544 43.45 1.71 E 1/2 2 3/4 - - - -
14.05 0.553 44.14 1.74 F 3 44 14 4 4
14.15 0.557 44.45 1.75 F 1/2 3 1/8 - - - -
14.25 0.561 44.77 1.76 F 3/4 3 1/4 - - - -
14.36 0.565 45.11 1.77 G 3 3/8 45 1/4 - 5 5 1/4
14.45 0.569 45.40 1.79 G 1/4 3 1/2 - 14 1/2 - -
14.56 0.573 45.74 1.80 G 1/2 3 5/8 - - 6 -
14.65 0.577 46.02 1.81 H 3 3/4 46 1/2 - - 6 1/2
14.86 0.585 46.68 1.84 H 1/2 4 - 15 7 -
15.04 0.592 47.25 1.86 I 4 1/4 47 3/4 - - 7 3/4
15.27 0.601 47.97 1.89 I 1/2 4 1/2 - 15 1/4 8 -
15.40 0.606 48.38 1.90 J 4 5/8 49 15 1/2 - 9
15.53 0.611 48.79 1.92 J 1/4 4 3/4 - - - -
15.70 0.618 49.32 1.94 J 1/2 5 - 15 3/4 9 -
15.80 0.622 49.64 1.95 K 5 1/8 50 - - 10
15.90 0.626 49.95 1.97 K 1/4 5 1/4 - - - -
16.00 0.630 50.27 1.98 K 1/2 5 3/8 - - 10 -
16.10 0.634 50.58 1.99 L 5 1/2 51 3/4 16 - 11 3/4
16.30 0.642 51.21 2.02 L 1/4 5 3/4 - - - -
16.41 0.646 51.55 2.03 L 1/2 5 7/8 - - - -
16.51 0.650 51.87 2.04 M 6 52 3/4 16 1/2 12 12 3/4
16.71 0.658 52.50 2.07 M 1/2 6 1/4 - - - -
16.92 0.666 53.16 2.09 N 6 1/2 54 17 13 14
17.13 0.674 53.82 2.12 N 1/2 6 3/4 - - - -
17.35 0.683 54.51 2.15 O 7 55 1/4 17 1/4 14 15 1/4
17.45 0.687 54.82 2.16 O 1/2 7 1/4 - - - -
17.75 0.699 55.76 2.20 P 7 1/2 56 1/2 17 3/4 15 16 1/2
17.97 0.707 56.45 2.22 P 1/2 7 3/4 - - - -
18.19 0.716 57.15 2.25 Q 8 57 3/4 18 16 17 3/4
18.35 0.722 57.65 2.27 Q 1/2 8 1/4 - - - -
18.53 0.729 58.21 2.29 Q 3/4 8 1/2 - 18 1/2 17 -
18.61 0.733 58.47 2.30 R 8 5/8 59 - - 19
18.69 0.736 58.72 2.31 R 1/4 8 3/4 - - - -
18.80 0.740 59.06 2.32 R 1/2 8 7/8 - - - -
18.89 0.748 59.34 2.35 R 3/4 9 - 19 18 -
19.10 0.752 60.00 2.36 S 9 1/8 60 1/4 - - 20 1/4
19.22 0.757 60.38 2.38 S 1/4 9 1/4 - - - -
19.31 0.760 60.66 2.39 S 1/2 9 3/8 - - - -
19.41 0.764 60.98 2.40 S 3/4 9 1/2 - 19 1/2 19 -
19.51 0.768 61.29 2.41 T 9 5/8 61 1/2 - - 21 1/2
19.62 0.772 61.64 2.43 T 1/4 9 3/4 - - - -
19.84 0.781 62.33 2.45 T 1/2 10 - 20 20 -
20.02 0.788 62.89 2.48 U 10 1/4 62 3/4 - 21 22 3/4
20.20 0.797 63.46 2.50 U 1/2 10 1/2 - 20 1/4 22 -
20.32 0.800 63.84 2.51 V 10 5/8 63 - - 23 3/4
20.44 0.805 64.21 2.53 V 1/4 10 3/4 - - - -
20.68 0.814 64.97 2.56 V 1/2 11 - 20 3/4 23 -
20.76 0.817 65.22 2.57 W 11 1/8 65 - - 25
20.85 0.821 65.50 2.58 W 1/4 11 1/4 - - - -
20.94 0.824 65.78 2.59 W 1/2 11 3/8 - - - -
21.08 0.830 66.22 2.61 W 3/4 11 1/2 - 21 24 -
21.18 0.834 66.54 2.62 X 11 5/8 66 1/4 - - 26 1/4
21.24 0.836 66.73 2.63 X 1/4 11 3/4 - - - -
21.30 0.839 66.92 2.64 X 1/2 11 7/8 - - - -
21.49 0.846 67.51 2.66 Y 12 67 1/2 21 1/4 25 27 1/2
21.69 0.854 68.14 2.68 Y 1/2 12 1/4 - - - -
21.89 0.862 68.77 2.71 Z 12 1/2 68 3/4 21 3/4 26 28 3/4
22.10 0.870 69.43 2.73 Z +1/2 12 3/4 - - - -
22.33 0.879 70.15 2.76 Z+1 13 - 22 27 -
22.60 0.890 71.00 2.80 Z+1.5 13.5 - - - -
22.69 0.893 71.28 2.81 Z+2 - - - - -
22.92 0.902 72.00 2.83 Z+2.5 - - - - -
23.06 0.908 72.45 2.85 Z+3 - - - - -
23.24 0.915 73.01 2.87 Z+3.5 - - - - -
23.47 0.924 73.73 2.90 Z+4 - - - - -
23.55 0.927 73.98 2.91 Z+4.5 - - - - -
23.87 0.940 74.99 2.95 Z+5 - - - - -
24.27 0.956 76.25 3.00 Z+6 - - - - -